Vacuum Paste Mixer

Vacuum Paste Mixer
Product Description

Vacuum paste mixer is used for the paste mixing section in accumulator production.It can automatically complete the following procedures:lead powder feeding, lead powder weighing, acid & water weighing, acid & water feeding,mixing and storing paste fast in vacuum condition with fully automatically control.


Main Mixing Machine -----------------------------------1 Set

Lead Paste Storage Hopper -------------------------------1 Set

Lead Powder Weighing Hopper -------------------------- 1 Set

Acid and Water Weighing Tank --------------------------- 2 Sets

Vacuum Condensation Recycling System -----------------1 Set

Electrical Control System --------------------------------- 1 Set

Comparison between Regular Paste Mixer and Vacuum Paste Mixer

Technical Details:

No. Type of Equipment Regular Paste Mixer (1000kg ) Vacuum Paste Mixer (1000kg) Comparison
  Mixing time 45~50min/time 23~26min/time 1.5~2   times of production capacity compared with regular paste mixer.
1 Daily Electricity   consumption (10T) 0.75h*45KW‚ 33.75 KWH 0.42h*35KW 14.7 KW/H Count   yearly paste productivity as 1500tons. For regular paste mixer, it needs to   mix 1500 cycles, the total power consumption=33.75KWH*1500=50625KWH. For   vacuum paste mixer, it needs to mix 1875 cycles, the total power   consumption=14.7KWH*1875=27562.5KWH.The yearly power consumption difference   is 23062.5KWH.
2 Environmental requirements highest   pollutant density: Pb=0.70mg/m3, acid fume=45mg/m3 Zero   emission, no need of environmental equipment Vacuum,   enclosed, zero emission.
The   acid, water, lead powder and floating materials will be recycled through   condensing device, no loss of material.
Ensuring   the accuracy of formula and the consistency of the paste each time. 
3 Penetration degree (at the   same apparent gravity) 20‚±4 40‚±4 The   materials are mixed averagely with low hardness, which is better for pasting.
4 paste temperature (when   mixing finished ) 45 ‚ 50  (which will prolong the   mixing time ) 43-45 (controllable) Not   disturbed by outside temperature. The mixing temperature during each stage   could be controlled by adjusting vacuum degree. It could avoid that the   change of paste hardness and apparent gravity because of high paste output   temperature.
5 Rotating method The   mixing bucket is fixed, scrapper rotates. Needle   type rotor stirrer rotates clockwise; the mixing bucket inclines and rotates   anticlockwise. The   vacuum paste mixer adopts needle type rotor stirrer rotates clockwise, the   mixing bucket inclines and rotates anticlockwise, forming a high-speed-   difference material stream, which could ensure that there are no blind angle   in the bucket and make average paste. 
6 Lubrication system Manual Automatically   concentrated lubrication. Ensure   necessary lubrication, protecting the equipments.
7 Cleaning system Manual   cleaning Automatic   high pressure cleaning system and drainage system. Saving   labor cost, the automatic cleaning system could clean fast and clear.
8 Process records None Every   time of mixing will be recorded.  
Contact Us

Unit 1202, No.498, Xinglinwan Road, Jimei District, Xiamen, Fujian, 361000, China
Phone :86-592-6027185